Fitzroy Freestanding Fireplace

SKU: FITZFS

Designed for Australian needs by Australian craftsman, the Fitzroy Profile Inbuilt Gas Heater has become a proven favourite.

Enjoy a panoramic view of realistic eucalypt look logs, as the all new Profile series Fitzroy is now supplied with a double glazed fascia as standard.


A clean, fuss free design with high heat output and superb energy efficiency.


Neatly fits the cavity of existing gas or oil space heaters.


If it's modern heater styling you're looking for then you can't go past the streamlined Fitzroy Profile range with its sleek lines and flush, double glazed glass front.The Cannon Gas Log Heater collection has been developed to deliver decadent warmth, efficient and safe operation with easy installation options for almost every renovation situation. That's because Cannon's range of modern gas heaters are designed and made in Australia with a thorough knowlege of Australian building styles, construction needs, and climate conditions.

Availability: Out of stock

AUD 3,299.00

Price as configured: AUD 0.00

Details
Details
Type   Inbuilt
  Freestanding option available
Colours available                 Black
  Metallic Platinum
Gas types available  Natural gas
  LP gas
Design features   Realistic eucalypt look logs
  Double glazed glass fascia
  Panoramic view
Controls   Electronic ignition and controls
Fan/heat settings   3 speed / 3 heat
Heat output   5.98 kW / 21.45 MJ/h
Heats on average   80 square metres (80 m2)
Gas consumption   26 MJ/hr
Efficiency rating   3.6 stars
  (tested to AS 4553:2008)
Safety   4 continuously monitored safety systems
Specifications
    Fascia         Freestanding overall (use FITZFSKITX-B option)
Height (mm)   651   863
Width (mm)   808   808
Depth (mm)   50   Heater depth 450 
  Pedestal depth 482

  Minimum distance from rear of heater to wall is 40mm. Total minimum depth from front of heater to wall is 490mm.

Refer to downloads tab for drawings.

Planning notes

  • Gas connection via a ½” copper compression fitting.
  • A 10 amp socket within 1.5m is required. Inbuilt models can be direct wired with an accessible isolating switch.
  • Maximum flue length is 4.5m.
  • If heater is being installed into a combustible area such as a timber or plasterboard mock fireplace, use optional accessory MOCKKIT12 mock installation kit.
  • If you have a larger opening than the maximum height indicated, a surround kit is recommended.
  • The optional accessory FITZFSKITX-B will(available in black colour only) convert a FITZIB-SDENB Fitzroy Profile Inbuilt into a Freestanding heater. The heater does not require a non-combustible base, and can be installed against a combustible wall with clearances of 40mm rear, 100mm side and 900mm in front of heater. The FITZFSKITX-B installation instructions provide further detail.
  • All Cannon inbuilt heaters MUST be flued. We recommend our own Inbuilt flue kit IBFLUEKIT accessory be used.
  • When selecting a heater, consideration must be given as to the construction of the building with regards to ventilation. This will affect the efficiency of the type of flue selected and how it will operate – e.g. high energy efficient rated homes have little allowance for the introduction of fresh air for combustion purposes, therefore issues can arise with reverse flow of air through a standard flue in these homes. Two storey extensions to existing homes can also reduce the performance of standard flues. Avoid installing standard flue heaters on external perimeter walls of high pitched roof buildings to reduce the possibility of reversed air flow through the standard flue. If in doubt always select Powerflued models as these are not affected by these issues.
Downloads
Reviews
Write Your Own Review
You're reviewing: Fitzroy Freestanding Fireplace
You may also be interested in the following product(s)